During setup, the Beacon is not showing up on the list when I try to pair.
Verify your Hub is set up and the LED is green
If it is not, go back in the setup process and repeat the steps to [set up your Hub].
Check that the LED of the Beacon is flashing purple
If it is not, press the button on the bottom of the Beacon once and allow 45 seconds to ensure it is ready to pair. The LED should be flashing purple.
NOTE: You can remove the Beacon from the wall to push the button.
If the Beacon is still does not appear on the list, move the Beacon and Hub closer together and try to pair again