Set Up Guide

Download the Aura Setup Guide (PDF).

Do not remove the stickers on the top of your Aura devices until setup is complete or use the Placement Card when removing device stickers to keep track of where they are in your home.

1. Download the Aura Home app and create an account
2. Once you've created your account, you'll receive an email from Aura Home Monitoring to verify your email address
3. Select the number of Aura Devices you have to set up (Starter Kit + Number of Accessory Beacon(s))
4. Select the number of floors you would like to monitor and name your Aura (e.g. Home)
5. If you have have any dogs or cats, select yes and indicate the weight of each pet. This will be used to learn the pet movement in your home
6. Get the Hub (labelled with a yellow sticker) and plug it in following the suggested placement for your home!
7. Select a room name for the Hub
8. With multiple floors, indicate which floor the Hub is located on
9. Select “Next” when the LED is flashing purple

10. Connect your phone to Aura

    Android:

    • Tap the “Go to WiFi Settings” button. This will take you to your phone Wi-Fi Settings
    • Select Aura from the list of networks. You will receive a notification that the network has no Internet access
    • Select “Yes”, and “Don’t Ask Again” for this Network if prompted

    iOS:

    • Exit the Aura app when prompted during setup
    • Go to your phone WiFi Settings
    • Select Aura from the list of available networks
    • Once connected, return to the Aura app

11. Confirm Aura address: It is important that you put in the correct address to enable the Auto Away feature and see Members as they arrive and leave

12. Get your Beacon (labelled with a white sticker) and plug it in following the suggested placement for your home
13. Select a room name for your Beacon
14. With multiple floors,indicate which floor the Beacon is located on
15. Select “Next” when the LED is flashing purple
16. Select the Beacon from the list with the matching 4 digit label
17. Click “Add a Device” if you have multiple Beacons and repeat steps 12-16
18. Once all devices have been paired, click “Next”
19. Tap rooms to create your Aura home layout

Setup Complete! Add Members or go to the app to view live motion. Keep the completed Placement Card for future reference.